SAFECAM dashcams in Malaysia range from compact single-channel front recording to dual-, triple- and four-channel systems covering the front, rear, cabin and sides. The right model depends mainly on the angles you need to record, desired video resolution, WiFi and GPS requirements, and whether you want hardwired parking recording.
We offer SAFECAM options for everyday commuters, family vehicles, e-hailing drivers and drivers who want broader vehicle coverage. This guide compares the current SAFECAM lineup, explains how channel count affects coverage, and helps you plan installation and parking-monitoring requirements before buying.
Choosing a dashcam is easier when you start with the recording coverage and features you genuinely need rather than simply choosing the highest-specification unit. The SAFECAM range covers several practical configurations, from a clean front-only setup to front, rear, cabin and side recording.
Choose front-only, front-and-rear, front-cabin-rear, or front-rear-left-right recording according to the areas you want captured.
Several SAFECAM models offer 4K front recording, while rear, cabin and side resolutions differ according to the selected model.
WiFi-enabled models allow compatible phone access for functions such as viewing, managing and downloading recordings.
Models such as Ultra-3 and Ultra-4 include built-in GPS for driving information such as location, speed or route data.
Supported models can continue providing parking-related recording functions when connected with the required hardwire kit.
We provide dashcam, hidden cigarette-port, hardwire and removal services through our Penang installation locations.
The main difference between SAFECAM models is the number of cameras and the recording quality available at each angle. Use this table as a starting point, then open the relevant model page for its complete current specification.
| Model | Channels | Coverage | Recording | Key Features | Good Fit For |
|---|---|---|---|---|---|
| Ultra-1 | 1 | Front | 4K front | WiFi, G-Sensor, optional hardwire parking recording | Simple front-only daily recording |
| X400 | 2 | Front + rear | 4K front + 1080P rear | WiFi, up to 128GB MicroSD, parking time-lapse support with hardwire kit | Everyday front-and-rear coverage |
| X800 | 2 | Front + rear | 4K front + 1080P rear | WiFi app control, hardwire parking recording support | Drivers wanting clear dual-channel recording |
| Ultra-2 | 2 | Front + rear | 4K front + 2K rear | 3.0-inch touch screen, WiFi, hardwire parking recording support | Higher-resolution rear recording and direct screen control |
| X300 | 3 | Front + cabin + rear | 1080P front + 720P cabin + 720P rear | WiFi, up to 128GB MicroSD, Type-C hardwire support | Entry-level three-angle coverage |
| X900 | 3 | Front + cabin + rear | 4K front + 1080P cabin + 1080P rear | WiFi, loop recording, G-Sensor, 150° front angle, hardwire parking support | E-hailing, family and passenger-carrying vehicles |
| Ultra-3 | 3 | Front + cabin + rear | 4K front + 2K cabin + 2K rear | Sony IMX335 front sensor, 5GHz WiFi, GPS, Night Vision+, hardwire parking support | Higher-specification three-channel recording |
| Ultra-4 | 4 | Front + rear + left + right | 4K front + 1080P rear + dual 1080P fisheye side cameras | 5GHz WiFi, GPS, night recording support, hardwire parking mode support | Drivers wanting broader exterior coverage |
A single-channel dashcam records one direction, while dual-, three- and four-channel systems progressively add additional viewing angles. Choose based on where useful evidence would most likely be needed during your normal driving and parking routine.
A front-only model such as SAFECAM Ultra-1 suits drivers who mainly want forward road recording. It also keeps the camera and wiring arrangement comparatively simple.
Front-and-rear recording is a practical option for everyday vehicles because it records what happens ahead and behind the car. SAFECAM dual-channel options include X400, X800 and Ultra-2.
A three-channel system records the front road, vehicle cabin and rear simultaneously. This configuration is particularly useful when the interior matters as much as the traffic outside.
The SAFECAM X900 provides 4K front, 1080P cabin and 1080P rear recording, while the SAFECAM Ultra-3 increases the cabin and rear recording to 2K and adds 5GHz WiFi and GPS.
The SAFECAM Ultra-4 records the front, rear, left and right views at the same time. Its side cameras can capture areas that a conventional front-and-rear system may not cover.
This type of coverage may suit drivers who are particularly concerned about side incidents, roadside parking or obtaining a wider record around the vehicle.
Your driving pattern is often a better selection guide than specifications alone. The following recommendations focus on the type of coverage each situation typically benefits from.
| Driving Situation | Recommended Direction | Why |
|---|---|---|
| Daily commuting | Ultra-1 or dual-channel model | Choose front-only for simplicity or front-and-rear for broader everyday coverage. |
| Family vehicle | Dual- or 3-channel | Add cabin recording when an interior view is useful. |
| E-hailing / passenger transport | X900 or Ultra-3 | Both provide front, cabin and rear recording. |
| Parking recording | Compatible model + hardwire kit | Parking functions on supported models require the relevant hardwired power setup. |
| Wider exterior coverage | Ultra-4 | Adds left and right fisheye cameras to the front and rear views. |
| Faster phone access | Ultra-3 or Ultra-4 | Both list 5GHz WiFi connectivity. |
| GPS data required | Ultra-3 or Ultra-4 | Both models include built-in GPS. |
Before choosing a SAFECAM, decide what you need recorded and how you want the system powered and installed. This prevents paying for unnecessary cameras or discovering later that parking recording requires additional hardware.
Decide whether you need front, rear, cabin or side views. A daily commuter may only require front and rear, while passenger-carrying vehicles may benefit more from an additional cabin camera.
Compare the resolution of every camera, not just the main front lens. For example, Ultra-2 combines a 4K front camera with a 2K rear camera, while X800 uses 4K front and 1080P rear recording.
WiFi is useful when you want to review or transfer footage without removing the memory card. Selected Ultra models use 5GHz WiFi for faster access.
If parking recording matters, confirm the correct hardwire configuration before installation. Supported parking functions depend on both the dashcam and its power arrangement.
WiFi-enabled SAFECAM models can connect to a compatible phone for functions such as viewing footage, changing supported settings and downloading recordings. The exact connection procedure can vary between models, so follow the instructions supplied for the dashcam you purchase.
Several current models specifically list built-in WiFi or WiFi app control, including Ultra-1, X300, X400, X800, X900 and Ultra-2. Ultra-3 and Ultra-4 list 5GHz WiFi.
First check that the dashcam is powered on and its WiFi function has been enabled. Also confirm that the phone is searching for WiFi networks near the camera and is not attempting to connect from outside practical WiFi range.
High-resolution footage contains more data than lower-resolution video. Transfer speed can also vary according to the dashcam model, WiFi connection and phone.
Yes. Dashcams use loop recording on supported models, so footage you need for an incident or claim should be copied to another device as soon as practical rather than relying on the memory card as permanent storage.
Parking recording is different from normal driving recording because the dashcam needs a suitable power source after the vehicle is switched off. SAFECAM product pages specify that supported parking functions require a compatible hardwire kit.
For example, X400 supports parking time-lapse recording when connected with a hardwire kit, while X300 requires a Type-C hardwire kit for its supported 24-hour recording function. X800, X900, Ultra-1, Ultra-2, Ultra-3 and Ultra-4 also specify hardwire-dependent parking recording or parking monitoring support.
Our dashcam installation service includes a front-and-rear hardwire installation option, with the hardwire kit stated separately from the installation service.
We provide professional dashcam installation through our George Town and Bukit Mertajam locations. Available services include standard front-and-rear installation, hidden cigarette-port setups, hardwire installation, single-camera installation and removal of an existing dashcam and wiring.
| Installation Service | Current Listed Price | Includes |
|---|---|---|
| Front & Rear Camera Installation | RM69 | Front + rear + cigarette-port power cable installation |
| Front & Rear + Hidden Cigarette Port | RM99 | Front + rear + hidden cigarette-port power cable installation |
| Front & Rear + Hardwire Kit | RM120 | Front + rear hardwire installation; hardwire kit sold separately |
| Single Camera Installation | RM59 | Front camera only or rear camera only |
| Dashcam & Wire Removal | RM50 | Removal of an existing dashcam unit and wiring |
Installation prices and arrangements can change, so use the SAFCA Dashcam Expert page when booking to review the current service options.
Our Penang dashcam installation service is available at SAFCA George Town and SAFCA Bukit Mertajam. Both locations provide local assistance for customers who want help choosing an installation method or arranging dashcam fitting.
181, Lebuh Melaka,
10400 George Town,
Pulau Pinang, Malaysia
Contact: +6017-347 6620
Hours: Monday–Sunday, 9:30 AM–6:00 PM
View Installation Details100G, Lorong Kerjasama 1,
Taman Kenangan, Bukit Tengah,
14000 Bukit Mertajam, Pulau Pinang, Malaysia
Contact: +6017-797 6620
Hours: Monday–Sunday, 9:30 AM–6:00 PM
View Installation DetailsWarranty coverage should be checked against the specific SAFECAM model you buy. Current product information lists 12-month warranty coverage for X300, X400 and X800, a one-year local warranty for X900, and a one-year official warranty for Ultra-2 and Ultra-3.
Keep your proof of purchase and product information after buying. If you need product or after-sales assistance, contact us through the SAFCA contact page so the correct model and purchase details can be reviewed.
We can narrow down the suitable SAFECAM much faster when we know how the vehicle is used and which views matter to you. Before contacting us, consider the following:
This approach helps us recommend the configuration that matches the actual use case rather than simply directing every driver to the most expensive model.
Choose Ultra-1 when front-only recording is enough, a dual-channel model for front-and-rear coverage, X300/X900/Ultra-3 when cabin footage is needed, and Ultra-4 when left and right side coverage is also important. Then compare resolution, WiFi, GPS and parking requirements within that channel category.
In summary, the best SAFECAM dashcam is the model that matches the areas you actually need to record and the way your vehicle is used. Decide on the required camera angles first, then choose the appropriate recording quality, connectivity and installation method.
Tell us whether you need front, rear, cabin, side or parking coverage. We can help you compare the suitable SAFECAM models and plan the right installation setup for your vehicle.
Contact SAFCA Book Installation Support
Discover reliable automotive technology and camera solutions from SAFCA. We provide quality dashcams, car electronics, digital cameras, and professional installation services with trusted brands SAFECAM, ROADCAM, and RODVUE.